Please use the troubleshooting below to resolve the following issues with Epic Roller Coasters.

IMPORTANT: Do NOT select the SRS option when turning on TELEMETRY.

  • Not getting any telemetry from Epic Roller Coasters
  • Not getting telemetry with the Oculus version
  • Telemetry seems buggy and random



Not getting any telemetry from Epic Roller Coasters

It may require that every time Epic Roller Coasters is started, you must re-enable telemetry or motion will not work. Epic Roller Coasters resets it to OFF when restarting the game. To enable telemetry in Epic Roller Coasters:

  1. Open Epic Roller Coasters

  2. Select the Menu icon (3 horizontal lines with dots)

  3. Scroll down to HARDWARE

  4. In the TELEMETRY section, select DEFAULT (Do not select SRS)

  5. Verify the IP Address is set to 127.0.0.1 and UDP Port is set to 7701

  6. Click on Start


If you are using the Steam version of Epic Roller Coasters and still unable to receive telemetry, please try the following steps: 


1) Right click on Epic Roller Coasters in your Steam Library and select Properties...


2) In the LAUNCH OPTIONS field, type: -telemetry network -port 7701


3) Close the Properties window and launch Epic Roller Coasters. 


4) Verify the IP Address is set to 127.0.0.1 and UDP Port is set to 7701 in Epic Roller Coasters and that the telemetry is STARTED. When telemetry is running, the screen should appear as below with the button changed to "Stop". 


5) Load into a coaster and verify that telemetry is being received by Sim Racing Studio by going to GAMES > Telemetry.


6) Click the Capture button to On. You should see telemetry appear in the columns indicating Sim Racing Studio is receiving telemetry from the game. 



Not getting telemetry with the Oculus version


  • Enter the computer IP address where Sim Racing Studio is running and the port 33001
  • Select Start
  • Enter into the Roller Coaster


 Again, enter your PC IP address and the port 33001. 



Telemetry seems buggy and random

Epic Roller Coasters has buggy telemetry that will spike in Sway and Heave. It is recommended to use a large amount of Smoothing Effects to mitigate the issue. 


If you have an actuator platform with a spike filter, its recommended to increase it to 3600 for the spikes of Sway and Heave to not feel jarring. If less motion is desired, reduced the Spike Filter down to 2700 or further to 1800. Note: Some regular motion on the coasters will be muted when the Spike Filter is reduced below 3600.


If you do not have an actuator platform, it is recommended to reduce the Max Angle to mitigate the extreme motion.